Ford Escape Automobiles Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-5 of 5 Results
  1. Problems And Solutions
    Hi all. 2014 Escape 1.6l 2 years ago had a new engine put in due to cracked block 1 year ago new transmission. Ever since new transmission, I get P301 code and engine light every few months, requiring cylinder 1 to need a new coil. Pop a new coil in and prob solved. Over the last year replaced...
  2. Problems And Solutions
    Hello, 2009 Ford Escape 3.0 here. It's an intermittent problem with a no start situation. I'll refer you to this video I watched with my exact problem When I use the jumper wire in place of the relay, the vehicle starts and runs fine with the exception of the check engine light sometimes...
  3. 2013 - 16 Escape / 2013 - 2019 Kuga Discussion
    Sister's car was fine. Went to store and came out to no crank, jump started and drove home. Has not cranked since. New battery, confirmed start circuit OK. Scanner could not communicate with PCM to check brake application and gear selector. Towed to my house. Was able to communicate with PCM but...
  4. Introducing <insert name>!!!
    Greetings! Seek expert advice on what to do. My 2008 Hybrid has been at the local dealer since mid-January 2022, following a bout with CV19 symptoms leaving me to leave the car idle for 30 days -afterward, no start, dash illuminated, with security locked flashing. Every week since the tow, a...
  5. Problems And Solutions
    07 2.3L auto AWD 166K , wouldn't start at times when cold out. Scan tool shows no codes as also does the pcm. Then one day it was -5F started no issue. Watched cam and crank sensor on scanner phase, fuel pressure and all other sensors seem to read good. Replaced fuel pulse module started right...
1-5 of 5 Results
Top