Ford Escape Automobiles Forum banner
1 - 1 of 49 Posts

· Registered
280 Posts
Be careful when removing the bolts for the splash guard. For me, all of the ones right under the bumper sheared off with no effort (even after using penetrating oil on all of them). Right now, I'm in the process of drilling out and retapping the holes. If you do need new bolts, these ones are M6 metric bolts with a 1.0mm thread pitch. I bought stainless steel bolts and anti-seize spray to hopefully help prevent this in the future.
1 - 1 of 49 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.