Ford Escape Automobiles Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
4,977 Posts
Discussion Starter · #1 ·
(click on thumbnails to enlarge)

Article No.
01-5-5

March 19, 2001

ELECTRICAL - CHARGING SYSTEM WARNING
INDICATOR LAMP ILLUMINATED - DURING COLD
AMBIENT TEMPERATURES BELOW - 6 DEGREES
CELSIUS (20 DEGREES F.) - VEHICLES EQUIPPED
WITH 2.0L ZETEC ENGINE BUILT 7/8/2000 THROUGH
2/12/2001 ONLY

FORD:
2001 ESCAPE

ISSUE
Some vehicles may exhibit a red charge lamp illumination in cold ambient temperatures below-6°C (20°F). This may be caused by the calibration of the Powertrain Control Module (PCM).

ACTION
Verify red charge lamp illumination. If normal diagnostics cannot resolve condition, reprogram the Powertrain Control Module (PCM) with latest calibration. Refer to the PCM Calibration Information Chart shown for details.
PCM CALIBRATION INFORMATION
Application
Old Part Number (-12A650-)
Tear Tag
New Part Number (-12A650-)
Old Calibration
New Calibration
NGS/WDS Qualifier
2.0L Manual Trans LEV (US)YL8F-GDGSW4YL8Z-GE0M12A205100M12A20511WDS B11_11 release
2.0L Manual Trans CAA (Clean Air Act)YL8F-PDHQE4YL8Z-PE0M12B205100M12B20511WDS B11_11 release
2.0L Automatic (CD4E) Clean Air Act (CAA)YL8F-TEKXS5YL8Z-TF0M11A205110M11A20512WDS B11_11 release
Obtain an Authorized Modifications Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.


OTHER APPLICABLE ARTICLES: NONE

WARRANTY STATUS: INFORMATION ONLY

OASIS CODES: 203000, 203100, 204000, 204200, 206000, 290000
 
1 - 1 of 1 Posts
Top