Ford Escape Automobiles Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
4,977 Posts
Discussion Starter · #1 ·
(click on thumbnails to enlarge)

Dealer Letter


Owner Letter



Attachment I - Administrative Information
OASIS ACTIVATED? Yes

FSA VIN LIST ACTIVATED? Yes (In-Stock Units only)

IN-STOCK VEHICLES
Correct all affected in-stock vehicles before demonstration or delivery.

CLAIMS PREPARATION AND SUBMISSION
^ Enter claims using Direct Warranty Entry (DWE).
^ Refer to ACESII manual for claims preparation and submission information.

Attachment II - Labor and Parts Information
LABOR ALLOWANCES
Description
Labor Operation
Labor Time
Install revised SMOG Emissions Information label over the existing SMOG Emissions Information on the Vehicle Content window sticker.03L17B0.2 Hour
SMOG Emissions Information Labels
Corrected SMOG Emissions Information labels are provided in Attachment III. Follow the instructions in Attachment Ill for printing and installing the corrected SMOG Emissions Information label.

NOTE:
For all affected in-stock units dealers are required to apply the revised SMOG Emissions Information label over the existing SMOG Emissions Information on the Vehicle Content Label which is located on the driver's side window.

Attachment III - Technical Information
The affected vehicles require installation of a corrected SMOG Emissions Information label. These labels are designed to be printed on a plain sheet of paper. Each sheet of paper contains five (5) revised SMOG Emissions Information labels.

Service Procedure
SMOG Index 0.51 Labels


SMOG Index 1.00 Labels


SMOG Index 1.44 Labels


SMOG Index 1.45 Labels


SMOG Index 1.51 Labels


SMOG Index 1.65 Labels


SERVICE PROCEDURE
1. Locate the VECI label under the hood and identify the three-letter label suffix.

2. Refer to the chart to identify the correct SMOG Index based on the VECI label suffix for the vehicle being serviced.
VEHICLE LINES
ENGINE
VECI SUFFIX
SMOG INDEX LABEL
Escape
2.0L​
-LPU,-LLT​
1.00​
Escape
3.0L​
-LRR,-LDJ​
1.00​
Escape
3.0L​
-LOD,-LGB​
1.51​
Escape
3.0L​
-LXC,-LQN,-LXE,-LQQ​
1.44​
Escape
4.0L​
-LGJ,-LNQ​
1.51​
Escape
4.0L​
-LGM,-LNY​
1.44​
Escape
4.2L​
-LVL,-LVC​
1.51​
Escape
4.6L​
-LQY,-LTC​
1.65​
Escape
5.4L S/C​
-LDC​
1.65​
Escape
4.0L​
-LEO,-LVB,-LVY,-LNT​
1.51​
Escape
4.6L​
-LDX,-LUT​
1.45​
Escape
4.6L​
-LVO,-LCC​
0.51​
Escape
3.9L​
-LYV​
1.51​
Escape
4.2L​
-LUG​
1.51​
3. Once identified, print the appropriate page and cut out one (1) SMOG Information label from the printed page. Retain the printed page for use on other affected vehicles which require the same SMOG Emissions Information.

4. Partially peel back the Parts Content Information label from the left side door glass.

5. Affix the new SMOG Emission Information label over the original using cellophane tape and reattach the Parts Content Information label to the window.
 
1 - 1 of 1 Posts
Top