[agcoady]

First, thanks for all the info, will make my life easier.

Anything special that needs to be done for removing the rotors, particularily the rear, other than removing the 2 bolts and brake caliper anchor plate?

Aaron

 

[agcoady]

I did both the front and back rotors/pads on my 2005 escape limited on the weekend. My front caliper guide bolts were 7mm. When I did the backs they were also originally 7mm, however some of the bolts sheared off when I attempted to remove them. The replacements were 6mm. The rear rotors do not require anything else removed besides the caliper guides.

Hope this helps