Ford Escape Automobiles Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
12,362 Posts
Discussion Starter · #1 ·
Here ya go, Weezy!

2007 Mustang Center High-Mounted Stop Lamp



Removal and Installation

1) Remove the decklid latch trim cover.

2) Release the locking tabs and remove the high mounted stoplamp assembly.
* Disconnect the electrical connector.



3) To install, reverse the removal procedure.

2007 Mustang Front Turn Signal Lamp



Removal and Installation

1) Remove the front fender splash shield. For additional information, refer to Section 501-02 .

2) Release the 2 locking tabs and remove the front side marker lamp assembly.
* Disconnect the electrical connectors.



3) To install, reverse the removal procedure.

2007 Mustang Front Splash Shield

Removal and Installation



1) Remove the 3 front fender splash shield screws.

2) Remove the 5 pin-type retainers and the front fender splash shield.

3) Remove the 2 pin-type retainers and position the rocker panel aside.

4) Remove the 2 pin-type retainers and the rear fender splash shield.

5) To install, reverse the removal procedure
 
1 - 1 of 1 Posts
Top