Ford Escape Automobiles Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
12,362 Posts
Discussion Starter · #1 ·
Removal



1) Using a #2 Phillips screwdriver, remove the screw on each side of the lamp assembly.

2) Depress the tab on the electrical connector, and remove the electrical connector.

3) To install, reverse the removal procedure.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top