Ford Escape Automobiles Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter · #1 ·
how hard would it be to wire up an auto down switch like the one on the drivers side for the passenger window?

thanks in advance pete
 

·
Premium Member
Joined
·
12,362 Posts
That would require another complete window switch module, for both the 2001-2007 models, and for the 2008 and newer models. There's a separate circuit board and switch that are added to the main window switch board, and it would need to be band-aided in to the passenger side of the board.

We had a Volvo S40 in Florida on our last trip there, and all four windows had both express up and down. I wonder if those switches are the same or similar as Ford's newer switches...
 

·
Registered
Joined
·
82 Posts
Discussion Starter · #3 ·
that would just be way to conveient ill have to look into it futher on a scale of one to ten how hard do you thing it would be?
 

·
Premium Member
Joined
·
12,362 Posts
Adding that extra board to the existing window switch board would be a 10. It's fairly complicated, and the housing isn't designed to hold an extra board.

I think Ajax found an aftermarket module that added express up and down to both of his front windows.
 

·
Premium Member
Joined
·
3,648 Posts
jpark said:
Adding that extra board to the existing window switch board would be a 10. It's fairly complicated, and the housing isn't designed to hold an extra board.

I think Ajax found an aftermarket module that added express up and down to both of his front windows.
If I remember correctly it was a boatload of wiring....not my cup of tea :)
 
1 - 5 of 5 Posts
Top