Ford Escape Automobiles Forum banner
1 - 20 of 26 Posts

·
Premium Member
Joined
·
12,362 Posts
Discussion Starter · #1 ·
Here are some Ford and Mercury emblem/badge part numbers.

F81Z-8213-AB...Ford Oval emblem on the grille, 2005-2007 Escape
YL8Z-7842528-BB...Ford Oval emblem on the grille, 2001-2004 Escape
YL8Z-7842528-AB...Ford Oval liftgate emblem, 2001-2007 Escape

YL8Z-7842528-AC..."ESCAPE" liftgate and door side emblem, 2001-2007 Escape
YL8Z-7842528-AA..."V6" fender and liftgate emblem, 2001-? Escape
1L2Z-7842528-FA..."XLS" liftgate emblem, 2001-2007 Escape
1L2Z-7842528-GA..."XLT" liftgate emblem, 2001-2007 Escape
1L2Z-7842528-MA..."LIMITED" liftgate emblem, 2001-2007 Escape

5M6Z-7842528-BA...Hybrid "leaf" emblem, 2005-? Escape and Mariner
5M6Z-7842528-AA..."HYBRID" emblem (same lettering as the "ESCAPE" emblem), 2005-2007 Escape and some Mariner Hybrids

5S4Z-5442528-AA..."ZX4" emblem, 2005-2007 Focus, makes a good "4X4" emblem
 

·
Registered
Joined
·
446 Posts
jpark said:
5S4Z-5442528-AA..."ZX4" emblem, 2005-2007 Focus, makes a good "4X4" emblem
I want to buy these and make a 4x4 emblem to put on the front factory grille. Will these mount to the plastic grille okay? Is there any risk of them falling into the engine area?

TIA!
 

·
Registered
Joined
·
321 Posts
Would "Escape" fit across the surface the front Ford oval mounts to??
 

·
Registered
Joined
·
781 Posts
JP, do you have the part numbers for the front and rear "Flying M" Mazda logo?
 

·
Premium Member
Joined
·
12,362 Posts
Discussion Starter · #5 ·
I don't have Mazda part numbers, but I did find the emblem for you. This one is the grille emblem.

http://tinyurl.com/b54oks

It's $8.91 as of this morning. It looks like it has three mounting pins and adhesive backing.

The liftgate looks like it takes the same part, but the Parts.com database (which isn't always perfect) doesn't show a price for it.
 

·
Registered
Joined
·
611 Posts
Can I Buy a Vowel? The E came off at the car wash. Now I have SCAPE on passenger door. Looks like it was put on with Billy Mays Miracle Putty.
 

·
Premium Member
Joined
·
12,362 Posts
Discussion Starter · #7 ·

·
Registered
Joined
·
79 Posts
Does anyone know if the following part will fit a 2010 Escape? Thanks.

YL8Z-7842528-AC..."ESCAPE" liftgate and door side emblem, 2001-2007 Escape
 

·
Premium Member
Joined
·
12,362 Posts
Discussion Starter · #10 ·
That's the original ESCAPE emblem, and it's just six individual self-adhesive letters on a backing strip. That part number was used on 2001-2004 Escapes. You need to align the letters manually.

BUT, if you use part number 5L8Z-7842528-A, you'll save around $10 (it's $12 versus $21.30 for the 2001-2004 part). It's the emblem used on 2005-2007 Escapes. The emblem is exactly the same, except that it also has a clear plastic carrier over the letters, and they're pre-aligned. Just remove the backing, place the entire carrier over the desired area, and press it down. Then remove the carrier.

The newer emblem is cheaper because it's far more common.
 

·
Premium Member
Joined
·
7,656 Posts
Any way you can tell me if the FOCUS emblem font size is the same size (height is the most important) as FREESTAR or EDGE or LIMITED (but not from the Taurus X)?? I might have to do a gamble if I can't get reliable numbers from dealerships...
 

·
Registered
Joined
·
79 Posts
V6 and door side emblems are an easy install, but you need to shave off some pegs on the door side emblems before you stick them on (for a 2010 XLT at least). Be sure to line them up perfectly before you put them on because once they touch the car they DO NOT move.
 

·
Premium Member
Joined
·
7,656 Posts
I'll give you mine when I take mine off in this upcoming month
 

·
Super Moderator
Joined
·
16,326 Posts
anyone know the part number or a place to buy the AdvanceTrac RSC Emblem?


I like to put it on my Escape.

thanks a lot
 
1 - 20 of 26 Posts
Top