Ford Escape Automobiles Forum banner
1 - 20 of 22 Posts

· Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
hello everyone i'm new here and i have been slowly modding my 08 escape limited . i recently purchesed a set of black/chrome 19's but i didn't get all the info before i paid for them . they are 19x9.5 with a 20 mm offset. they are alot wider than i was hoping they would be so not sure if anyone knows if they will work or not. if they do i hope they don't stick out to far. if they don't they will be forsale very soon
 

· Premium Member
Joined
·
13,345 Posts
Hi Ronnie! Welcome to the City!! I know somebody here will be able to answer your question.
Please post pics of your Escape ASAP. Colleen demands them. :D

:welcome: :welcome: :welcome: :welcome:
 

· Premium Member
Joined
·
4,977 Posts
Scooter Scott said:
Whats the bolt pattern of the rims?
Rims don't have bolt patterns..! :bang:

The stock offset is 35 mm on a 16x7 wheel, so the 9.5" wide rim and 20 mm offset will probably stick out. Check your local laws about that.

The bolt pattern on the wheels should be 5x114.3, which is 5x4.5".
 

· Premium Member
Joined
·
3,648 Posts
Ahh I knew better than that...I was doing good by saying wheels in other threads instead of rims....anyways...THAT is what I was going to get to is what the bolt pattern was. I knew the offset...punk!
 

· Premium Member
Joined
·
4,977 Posts
DarkScape said:
I think the use of the word Rims is accuate.

Darkscapes Math:

Rims + Tires = Wheels

:beer:
Rim + Spokes + Hub mounting pad = Wheels

Tires = Tires

Rim = the outer part of a wheel that a tire mounts to

EDIT: Okay, a beadlock rim would have a "bolt pattern" - apologies to Scott for the hammer-to-his-faceness ;-|
 

· Registered
Joined
·
12 Posts
Discussion Starter · #12 ·
the rims fit but they went past the fender well so i ordered new rims yesterday . they are konig black lace rims with a 35mm offset so by monday or tuesday i should have pics up of the tv's installed and lowered with rims
 

· Registered
Joined
·
12 Posts
Discussion Starter · #14 ·
1.5" all around . i was hoping to find a decent deal on the intrax but i found the h&r springs. and good news today my new rims came in and i sold the old ones.so possibly by thursday i could everything installed
 

· Registered
Joined
·
1,058 Posts
I hope people keep in mind that the center bore also matters a lot.
 
1 - 20 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top