Ford Escape Automobiles Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
321 Posts
Discussion Starter · #1 ·
A couple weeks ago my engine light went on, throwing the "EGR valve flow insufficient" code. The same thing happened a few months ago, so instead of cleaning the valve, we just bought a new one.

But now my engine light is still on after 30 or so miles, so is there anything else that could be setting off that code?

And is there any way to clear the code from my car?

Any help is greatly appreciated, thanks!

[mod]Moved to Problems And Solutions.[/mod]
 

·
Registered
Joined
·
679 Posts
disconnect battery for a few minutes worked on my chrysler?
 

·
Registered
Joined
·
611 Posts
If the code returns, check/replace the DPFE sensor. If possible, replace with a Air-Tech brand. They come with the two replacement hoses too.
 

·
Registered
Joined
·
321 Posts
Discussion Starter · #5 ·
ok so i just went ahead and replaced the EGR valve and the DPFE sensor, so we'll see if the engine light stays off this time. thanks for the input
 

·
Registered
Joined
·
611 Posts
lilshimy36 said:
ok so i just went ahead and replaced the EGR valve and the DPFE sensor, so we'll see if the engine light stays off this time. thanks for the input
It should........ :yes:
 

·
Registered
Joined
·
321 Posts
Discussion Starter · #7 ·
just an update, engine light is still off. thanks
 
1 - 7 of 7 Posts
Top