[disciplecore]

I bought a kit from u-haul i didnt like it because i have to cut wires i was wanting to plug into the stock female plugs in the escape there are two plugs in the back one with four wires and one with two, i need to find a wire kit for it, I tried to test the wires but only get readings on one, am i doing this wrong?? thanks

this is the kit i bought
http://store.uhaul.com/Wiring__lights/M ... _Piggyback

 

[jpark]

Welcome to E-C!

You may not need the U-Haul kit at all. Check the area shown in this post for a factory trailer wiring harness.

viewtopic.php?f=3&t=590&st=0&sk=t&sd=a&hilit=trailer+trailer+wiring#p11700

 

[disciplecore]

Thanks Jpark this helped alot im going to go wire it in a few

 

[jpark]

:thumb:

 

[disciplecore]

I got it wired thanks to Jpark!

 

[Scooter Scott]

Can I just say I love the mud :bang:

 

[jpark]

Yes. And you just did.

:bill:

I got it wired thanks to Jpark!

:thumb:

Glad to help!

 

[disciplecore]

Ive drove about 800 miles from Missouri to Texas twice with my trailer and i have had no problems i had about 900lbs in it and the trailer weighs about 1000 and the road was iced and the escape did really good, i could cruise about 75 at about 2400 rpm

 

[Scooter Scott]

Did your Escape have the tow package?

 

[disciplecore]

well it had the spot inside the back door panel for the trailer wire adapter but i just cut it and wired it myself