Ford Escape Automobiles Forum banner

home link and 12V outlet

4121 Views 15 Replies 8 Participants Last post by  goldash03
So these are a couple of things that i added to my Escape, things that should have been there from the factory in my opinion, when a car leaves the assembly line with a LIMITED badge on the trunk.

This is a homelink module that i put in the visor(came off of a lincoln town car)




And a 12 V socket that was suposed to be in the trunk driver side.Funny that the mold was there in the plastic panel but they never put one in ,so i just wired this from the one in the front because i've looked for the harness in the back but it wasn't there. I took it off of a Tribute so it will look OEM. I needed a 12 V socket in the back once and it wasn't there so now there is.




That's it for now.Thanks for watching guys!
See less See more
4
1 - 2 of 16 Posts
Nice. I splurged and bought the mirror with homelink, temperature, compass and auto dim.
Did you remember to grab and install the temp sensor?
1 - 2 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top