Ford Escape Automobiles Forum banner

On Board Test...

4411 Views 14 Replies 8 Participants Last post by  Airmapper
Hi Fellas,

This is my first post so forgive the blandness of my page. I have an 07 Ford Escape XLT V6 4X4. I recently found that I could start a "test" by pressing and holding the ODO Reset button and turning my ignition switch on. Does anyone know where I can get a list of what the different readings represent? I can only decipher a few of them.

1 - 1 of 15 Posts
I don't think it will display trouble codes. I find it amusing to play with and if I had an issue might be able to use some of the info to see what the computer thinks is going on, but for full interface you would still need an OBD II cable connection to an appropriate device, in my case a laptop running software that can read it or some dedicated handheld.
1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.