Ford Escape Automobiles Forum banner

Sub Install

1968 Views 5 Replies 2 Participants Last post by  Big_Dawg
I've been back in forth 100 times over, and I've made my decision. After getting my Alpine head unit I have been determined to finish my system. I have decided to run one AQHDC318 powered by an AQ2200D. Should sound good. I love bass but, I'm pretty handy at setting systems up to where the mids and highs can still be heard crystal clear. I listen to all music from reagee to country to metal to rap and R&B. So, I think this will help feed my love for bass after doing some research. But, first step 2 or 3 layers of Dynamat! Yay FUN FUN!!! :rockon:
1 - 2 of 6 Posts
Get that instead of Dynamat, it is a better bang for your buck. I would say at least 1 layer on the whole car (doors, floor, roof, hatch etc.) and than possibly double up on the hatch and the roof above the hatch. Check my build to see my install of this stuff. Also what kind of electrical are you going to have? That amp is power hungry so I would say at least (2) runs of 1/0 wire, a decent battery under the hood and a good battery or 2 in the back.
The HDC3 is definetly a great sub and can handle well over 2000 watts. Is it going to be copper coil or aluminum coil?
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.