No boundaries roof rack retrofit mariner

Body, brush guards, step bars, paint, detailing, more

No boundaries roof rack retrofit mariner

Postby MercuryEscapé22 - December 12th, 2020, 11:14 pm

Alright guys just finished up retrofitting the rear bumper assembly from a 2005 ford escape no boundaries so I can have the rear bumper mounts for the rack but I also wanted to keep the 2" recover for my trailer hitch and the factory bumper I have successfully done the swap as well as added 2inch spacers on all four wheels will post pictures of step by step instruction guide to anyone thinking of doing it.
MercuryEscapé22
 
Posts: 14
E-C ROOKIE
WELCOME TO E-C!
Joined: August 20th, 2020, 2:00 am
Location: Colorado USA
My vehicle: 2007 Mercury Escapé 4x4 3.0L
My vehicle's name: Merc-nasty

Remove Advertisements

Escape-City.com
Advertisement
 

Re: No boundaries roof rack retrofit mariner

Postby MercuryEscapé22 - December 16th, 2020, 8:19 am

Here's some of the picture had to cut off the small hitch welded onto the no boundaries escape as well as remove the welded on nuts (if I was smart and kept the bolts from the no boundaries escape I wouldn't of had to) then mounted in place of the factory bumper sized up the bumper cover and cut out the holes for the rack mounting then spray painted with no rust rust-oleum before buttoning it all up and testing it (I also painted to no boundaries rack black to match my color scheme)
Attachments
20201212_184035_HDR_copy_800x351.jpg
20201212_182205_HDR_copy_640x281.jpg
20201212_183746_HDR_copy_640x800.jpg
20201212_182128_HDR_copy_640x281.jpg
20201212_182132_HDR_copy_640x281.jpg
MercuryEscapé22
 
Posts: 14
E-C ROOKIE
WELCOME TO E-C!
Joined: August 20th, 2020, 2:00 am
Location: Colorado USA
My vehicle: 2007 Mercury Escapé 4x4 3.0L
My vehicle's name: Merc-nasty

Re: No boundaries roof rack retrofit mariner

Postby MercuryEscapé22 - December 16th, 2020, 8:24 am

Finished product I would definitely have saved about an hour of time if I had kept the bolts from the donner no boundaries escape the mercury's mounts with the nuts towards the inside of the car and the no boundaries mounts with the nuts welded onto the bumper towards the outside of the car but other than that was a fairly easy install took me about 3 hours to do
Attachments
20201212_201524_HDR_copy_640x800.jpg
20201212_201524_HDR_copy_800x800.jpg
20201212_201517_HDR_copy_800x800.jpg
20201212_201510_HDR_copy_800x351.jpg
20201212_201505_HDR_copy_800x800.jpg
MercuryEscapé22
 
Posts: 14
E-C ROOKIE
WELCOME TO E-C!
Joined: August 20th, 2020, 2:00 am
Location: Colorado USA
My vehicle: 2007 Mercury Escapé 4x4 3.0L
My vehicle's name: Merc-nasty


Return to Exterior Mods

Who is online

Users browsing this forum: No registered users and 25 guests