Color matching SEM bumper coater

[martin-csr]

SEM Bumper Coater Aerosols

Does anyone know of a cross-reference chart for color matching SEM bumper coaters? I installed a new certifit bumper cover & was wondering if there is an exact match available. I know you can try to match the cap color to the bumper cover, but there is some trial & error doing it that way. I'm assuming the certifit Dk gray is supposed to be the same color as a Ford Med Dk platinum. (?) .... Thanks.

.....

[onslaught874]

i know this is an old post. the trim paint that works for 01-04 exterior grey trim is SEM 39193 Dark Gray Bumper

[martin-csr]

Thanks. I went with 39173 Dark Smoke. considered 39183 Medium Gray, but the local store didn't have it in stock. The 39173 was a good match for the dark gray certifit aftermarket Fr bumper cover. It has been over 2-1/2 years & the bumper coater has held up perfectly. I take the car to the bubble-brush carwash regularly. no scratches, peeling, fading or anything.

note: the sun is to the right, so the Fr bumper cover plastic looks lighter than the painted plastic, but it's pretty much the same color.

tag: 39193

[bangster]

Looks good. I have a 2017 and this is my first plastic lower clad vehicle, at only 3 years old and 65,000 miles it has a fair share of wounds and places it is getting flaky, I would love to color match it since it is very close in color to "Magnetic Metallic" that the vehicle is, and also paint the trim panel under the rear bumper where the exhaust comes out body color.