2010 escape pcm!

[willi2307]

Hi! A need to replace the pcm on my 2010 ford escape limited 2.5L 4x4 and i can not find the exacte number then the pcm that is already in the car.

The number of the pcm that is in the car is

AL8Z-12A650-AFA
9L8A-12B684-KA

I would like to know if

AL8A-12A650-AFA would fit! Thanks!

Happy easter

[ITBland]

You either need to get a PCM out of an exact match Escape, or reprogram one with your Escape's as-built settings (which should be done even if you think you have an exact match). Here is the list of possible part numbers: https://www.fordpartsgiant.com/parts-list/2010-ford-escape-gas/engine-modules-and-sensors.html?PNC=12A650
HTH

[14theRoad]

You either need to get a PCM out of an exact match Escape, or reprogram one with your Escape's as-built settings (which should be done even if you think you have an exact match). Here is the list of possible part numbers: https://www.fordpartsgiant.com/parts-list/2010-ford-escape-gas/engine-modules-and-sensors.html?PNC=12A650
HTH

Late to reply but even if you match the Part number (Hardware) you would still need to program the part with you Build information (firmware/Software). The Firmware would contain the information about the options your car has as well as the fuel map and anti-theft information as well.